WIN95 and CT

[bsimonson@comcastpc.com]

For all who replied to my help requests, a gracious thank you.  

As it turned out, and as I finally figured out, the problem was not with the
CT or the hardware (since it did work properly under WIN95) but rather with
the Dell BIOS not recognizing com 2 in DOS.  The BIOS had apparently gotten
corrupted. I solved the problem by downloading a copy of the BIOS from
Dell's www page and reflashing.  Everything now works properly, and it only
took about 5 minutes to fix (unfortunately it took about a week to
diagnose).

Thanks again
================================================================
Beryl D. Simonson KE3GA   
H(610) 664-0549 bsimonson@comcastpc.com
O(215) 765-4600 bsimonson@slfcpa.com
Frankford Radio Club
================================================================

--
Submissions:              ct-user@ve7tcp.ampr.org
Administrative requests:  ct-user-REQUEST@ve7tcp.ampr.org
WWW:                      http://www.ve7tcp.ampr.org/Software/ct
Questions:                owner-ct-user@ve7tcp.ampr.org