radio control

[Joseph J. Duerbusch]

ke6ber@usa.pipeline.com wrote:
> 
> Ok, I've got things set up, and here's the situation/problem.
> 
> I am using a 386 with an Advantage serial card that has a db9 9 pin
> connector for the serial port.  I am running this to the IF-232, and then
> into a Kenwood TS-450.  Here's the problem.  CT will set the radio's
> frequency, but it won't read the frequency from the radio. When I change
> bands on cT, the radio changes bands, but not vice versa.  It seems that
> there is info getting to the radio, but none getting back to the computer.
> Any suggestions? Thanks in advance
> 
> Al, KE6BER/1, ke6ber@usa.pipeline.com
> 
> --
> Submissions:              ct-user@ve7tcp.ampr.org
> Administrative requests:  ct-user-REQUEST@ve7tcp.ampr.org
> WWW:                      http://www.ve7tcp.ampr.org/Software/ct
> Questions:                owner-ct-user@ve7tcp.ampr.orgI had the same problem with my Kenwood TS-850S/AT.  I was using version 
9.0 and when I changed to version 9.27 the problem went away.  You didnt 
say what version you are using, but before doing anything, try version 
9.27.

Joe K0BX

--
Submissions:              ct-user@ve7tcp.ampr.org
Administrative requests:  ct-user-REQUEST@ve7tcp.ampr.org
WWW:                      http://www.ve7tcp.ampr.org/Software/ct
Questions:                owner-ct-user@ve7tcp.ampr.org