[ct-user] Box for keying Xmiter

[Mike Walker]

David

This is easier than Heathkit.

You need to build an interface for either your Parallel port of your Serial port.  The diagrams are in the manual.  All you need is a DB25 connector, 2 resistors and a 2n222 transistor, as well as some wire and a 1/4" phone plug for the radio.

Mike VA3MW

At 09:56 98-12-31 , David H. Walker wrote:
>
>Well. laziness has set in. I need to know how to key my ft1000mp using CT.
>I have a TNC, but this is being used on a different port for RTTY. I am
>confused as to how to proceed. I am not very good at construction even
>though I have built some Heathkits.
>73's
=================================================
Mike Walker VA3MW
Corbeil Contest Club
http://www.qrz.com/wrad/directory.cgi?VA3MW

--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com