[ct-user] Fw: Import

[Jim Reisert]

At 07:52 PM 7/15/99 -0400, Robert S Morris wrote:

>All is well until I went to import into my logging program..
>About 800 errors in the BAND DATA..
>I used the B2R9 utility and according to the support
>guy for the logging program, the info is screwed up
>after it comes out of the B2R9 utility..
>That .exe is dated 2-1-99 with 37020 bytes.
>
>Contacts made on 6M  came out on 20M..contacts made
>on 15 came out on 12M...

These are not errors - it is the way it's always been.  CT uses a different 
internal band-numbering scheme for FD which "appears" to confuse 
B2R9.  However, B2R9 and R2B9 complement each other, so the data *looks* 
wrong, but R2B9 does the right thing with it.

If you're trying to use the .RES data to import into a logging program, you 
should be using the CT to ADIF conversion utility instead.

73 - Jim AD1C

--
Jim Reisert AD1C <jjreisert@alum.mit.edu>
http://jjr.ne.mediaone.net


--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com