[ct-user] Need info - non-supported radios in CT

Jim Reisert Jim Reisert <jjreisert@alum.mit.edu>
Wed, 09 Jun 1999 18:58:28 -0400

Are you using CT to interface to a radio that is not directly supported by
CT?  If so, please send me a message telling me how you are doing it.

An example would be setting the hex code in your IC-706 to 4h, then telling
CT that an IC-735 is connected.

I would also appreciate hearing about radios with computer interfaces that
DO NOT work with CT.  I do not believe that the IC-746 works (someone said
that ICOM gave it a different command set), and I've heard that TS-450 may
or may not work.  If you *HAVE* made one of these radios work in CT, how
did you do it?

I'd like to upload this information to the CT web page.

I will summarize any responses I receive back to the reflector.

Thanks & 73 - Jim AD1C

Jim Reisert AD1C <jjreisert@alum.mit.edu>
Home Page:  http://jjr.ne.mediaone.net/

Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com