[ct-user] CT939 does not turn my OR2800 rotor

[00tlzivney@bsuvc.bsu.edu]

I got CT939 to load and work after disabling EMM386 in the config.sys file..
even tho it worked fine on 9.00, 9.10a, and 9.27 with EMM386 loaded....

Anyway, now I can't get CT939 to turn my OR2800 rotor.  The rotor turns
fine when using a telecommunications package: 9600 baud, COM1.

But, when I set the Communications Setup in CT939 to Com1, 9600, Rotor1
and Rotor1 is set to OR2800, nothing happens!
I type "30" in the callsign field, hit CTRL-F10, and watch the
bottom of my screen print "Rotor 1 to 30 degrees"  ... but NOTHING happens
ever.  After exiting CT, I can still turn my rotor using TELEX (my
communications package).

What am I missing now?

Thanks.

Terry Zivney, N4TZ/9
00tlzivney@bsuvc.bsu.edu


--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com