[ct-user] re: Back to 9.27 version

[Waldemar Krzok]

> One last item I forgot...#1 station after you have tried to send CW 
> with it in later versions and transmitter is locked in Key Down Mode...
> 
> It won't clear and unkey the rig by exiting CT program or any other 
> command until you physically turn off the computer or push the reset 
> button on the computer

I'd had same problem with keying after I moved from 9.27 to version 
9.3x. I noticed, that my keying hardware I made another day was 
not adequate with specs. I used pin 1 of LPT for keying (LED of 
opto-coupler to +5V) and did NOT use pin 17 (CW select). After 
adding a transistor everthing works fine. Just an idea....

Waldek, DL7ANQ & SO6ANQ


--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.k1ea.com/
Questions:                owner-ct-user@contesting.com