[ct-user] CT and LPT antenna switch problem
Dave Hawes" <firstname.lastname@example.org
Tue, 7 Sep 1999 20:24:21 -0400
The -AC (antenna control) feature is working in all the versions of
CT that I have tried in the past few years. However, we have had
reports that if your LPT port is configured as EPP, then the -AC
won't work. Go to the CMOS Setup on your computer, and make
sure that the LPT port is configured for SPP, and give it another try.
Let me know how you make out.
73 - Dave N3RD
Top Ten Devices
On 7 Sep 99, Michaela Riederer wrote:
> hello everybody,
> this is Martin, dl4nac. maybe you can help me:
> a group of contesters from the Bavarian Contest Club tried to get a band
> decoder from top ten devices run together with CT. we did not succeed.
> we used a 25pin-cable from the computer-lpt to the band decoder box. we
> tried some different computers and CT versions 8.50, 9.37 (with -A switch)
> and 9.39 (with -A switch). we sometimes had a kenwood ts850 at the com,
> sometimes not. we sometimes used lpt also as a key and/or dvk-port,
> sometimes not. all attempts failed.
> now the question is: did we forget something? which CT-version do we need
> for this?
> any help is very much appreciated. many thanks in advance. 73s de Martin.
> Submissions: email@example.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.k1ea.com/
> Questions: firstname.lastname@example.org
Administrative requests: ct-user-REQUEST@contesting.com