[ct-user] 9.57 & wpx band log problem
Tue, 3 Apr 2001 21:41:54 EDT
Second attempt at sending? 1st one "bounced" for unknown reasons...
Using 9.57 during WPX, I ran the contest on a wim starting an hour late, &
>haven't run any contests in awhile -so you could say I was in a hurry & did
>Shortly after starting I notice the band is on 20m even though I stated in
>the setup I was running Single Band (10m) & low power. I was able to switch
>the display via Alt-F2 down to 10m, but upon entering another contact it
>would switch back to 20m on the display immediately.
>This is how I discovered CT & the rig were not talking. No amount of setup
>during the contest allowed the s/w to talk to the rig. So, you could say Op
>error from being out of practice & lack of prep, and not having run CT on
>this rig before (IC-756.)
>Now the whole log shows 20m instead of 10m. Anyone know how I can change
>whole log to reflect actual band used? Or do I need to edit the whole log
>(630 Q's) ??
>Thanks all & 73,
>de Dave K6JOX
Administrative requests: ct-user-REQUEST@contesting.com