[ct-user] Making CT talk to my IC-765 Through My Windows-98SE Machine.

[Bill Hider]

There are three ways to get to DOS from Windows 95/98.  You tried the 2nd
one.
The first one is the DOS prompt at the Start | Programs menu - this rarely
works either.

Try the third one: Start | Shutdown | Restart, then when the message
that says: Starting Windows appears, press F8.  Then select "Command Prompt
Only".
Now you are in the "true DOS" mode.

Bill, N3RR

----- Original Message -----
From: "Frank Grossman" <fgrossma@idt.net>
To: <ct-user@contesting.com>
Sent: Tuesday, January 02, 2001 2:35 AM
Subject: [ct-user] Making CT talk to my IC-765 Through My Windows-98SE
Machine.


>
> I'm setting up CT to operate on my fancy 733 MHz Win-98SE machine with
some
> success.  Rig control seems to be the problem.  Keying works fine through
> the LPT port, thanks to much help from Pete, Ted and others last summer!
>
> Specifically, my IC-765 is hooked up to COM1 and works fine with DX4WIN.
> I'm starting CT by doing shutdown|restart in DOS mode, then loading my TSR
> for COM1.  Port settings seem correct (IRQ4, 1200 baud, etc.), and work
fine
> on my -486 machine.
>
> What am I missing here, folks?
>
> 73,
> Frank
> wb2bxo@arrl.net
>
>
> --
> WWW:                      http://www.k1ea.com/
> Submissions:              ct-user@contesting.com
> Administrative requests:  ct-user-REQUEST@contesting.com
> Problems:                 owner-ct-user@contesting.com
>


--
WWW:                      http://www.k1ea.com/
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
Problems:                 owner-ct-user@contesting.com