[ct-user] CW Keying
Wed, 14 Nov 2001 08:01:26 -0500
I assume your running this under native DOS and not using any version of
Windows? Which version of CT?
Also, what are the IRQ's and Base memory address of Com1. You will need to
look at the BIOS in the Laptop to confirm this.
Make sure it matches COMTSR1. You can set the values in COMTSR1 to match
those of your hardware. Are you confident that your problem is not with the
CW Keying circuit?
Let us know.
----- Original Message -----
From: "Bmanning" <firstname.lastname@example.org>
To: "CT" <email@example.com>
Sent: Tuesday, November 13, 2001 9:48 PM
Subject: [ct-user] CW Keying
> I have a Dell Inspiron 5000e lap top. I can't get the com1 port to do
> anything. I have checked all the lines coming out tof the port and nothing
> keys. I have checked the address of the port and it looks OK. HELP!!!
> NJ3K Bruce
> ct-user mailing list
> firstname.lastname@example.org Subject=unsubscribe to unsubscribe