[ct-user] USB to Serial Converter problems

Don Melcher don@hfradio.com
Fri, 23 Nov 2001 09:43:28 -0800

Most USB adapters don't support DOS - and if they do, require different IRQs
for each port - another reason I switched to Writelog.


-----Original Message-----
From: ct-user-admin@contesting.com
[mailto:ct-user-admin@contesting.com]On Behalf Of Bob Mandeville
Sent: Friday, November 23, 2001 9:17 AM
To: ct-user@contesting.com
Subject: [ct-user] USB to Serial Converter problems

My PC is a Pentium III with one serial port.  I purchased a
USB-to-Serial converter from USB Products.  My intention was to be able
to hook up my FT-920 and my KPC-3 for use with CT.  The USB converter
works OK from the desktop in HyperTerminal, but doesn't appear to work
in CT.  There are no software conflicts in the Device Manager.  COMTSR's
are loaded for both the rig and the KPC-3.

Has anyone had any experience with this, or seen these symptoms?


Bob, N1EDM

ct-user mailing list
ct-user-request@contesting.com Subject=unsubscribe to unsubscribe