[ct-user] DVP Help

Bob Naumann - N5NJ n5nj@gte.net
Fri, 1 Mar 2002 06:22:23 -0600


You need to establish a RAM Drive to hold your DVP files.

Check your DVP manual.

----- Original Message -----
From: "William Liporace" <na2na@earthlink.net>
To: <ct-user@contesting.com>
Sent: Friday, March 01, 2002 5:33 AM
Subject: [ct-user] DVP Help


> Sorry to take this up in so many places, but I need help! I had a turn of
> events and decided to try to get into the contest. I was thinking that
> packet to my local node was going to be my problem, but now it is my DVP.
I
> have two PCs,  They are both decent working machines. I have DOS 6.22
loaded
> on a hard drive. I have TR and CT loaded on the drive. The DVP board is
> jumpered to IRQ 5.
>
> Here is my software setup:
>
> CT
> comtsr1
> comtsr2
> dvptsr -i5
> CT setup to run. Start Ct and have tried OPON and ONAIR to turn on the
DVP,
> but nothing seems to get it working. No spinning curser, no indication
that
> it is working. The packet and radio work just fine.
>
> TR
> dvptsr -i5
> TR set to run. I used the Ctl-K to turn on and off the DVP. I can see the
> program recording, but it will net send a CQ out (it is what I tried to
> record). The packet and radio work just fine.
>
> I really would like to get on the air, but the DVP will make it a lot
> easier. I can tell you I have torn apart my station trying to fix this.
Any
> ideas??
>
> William Liporace NA2NA
> 763 Huntingdon Drive
> Niskayuna, NY 12309
>
> na2na@earthlink.net
>
> _______________________________________________
> ct-user mailing list
> ct-user@contesting.com
> ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> http://lists.contesting.com/mailman/listinfo/ct-user