[ct-user] DVP Help

Bob Naumann - N5NJ n5nj@gte.net
Fri, 1 Mar 2002 06:50:24 -0600


When you have the symptoms that he has you do.

He probably had a RAM Drive at one time that is now disabled and CT is
looking for the files there, as defined in a DOS SET statement.  (SET
DVPPATH = D:)

The other option is to change the SET statement to point to the DVP files on
your hard drive if you don't want to use a RAM Drive.



----- Original Message -----
From: "David Robbins" <k1ttt@arrl.net>
To: "reflector ct-user" <ct-user@contesting.com>
Sent: Friday, March 01, 2002 6:26 AM
Subject: RE: [ct-user] DVP Help


> > You need to establish a RAM Drive to hold your DVP files.
> >
> > Check your DVP manual.
> >
>
> you do?  I have been using dvp's for years with old 386dx25's and never
> used a ram drive.
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://www.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
>
>
>
>
> _______________________________________________
> ct-user mailing list
> ct-user@contesting.com
> ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> http://lists.contesting.com/mailman/listinfo/ct-user