[ct-user] Fix_mine1.exe question

[Jose M. Valdes R. YV5LIX]

Hi all.

I will be running CTWIN ver 9.77 during this weekend's ARRL SSB contest
and I gave a question.

Being in the DX side of the contest I always get call from DX stations,
and as you all know this DX to DX QSOs are not valid for the contest's
purposes, but instead of loosing time by explaining the DX station that
his/her QSO is not valid, and since I would like to have a log record of
their QSOs, I would like to be able to log the QSOs and after the
contest replace their callsign with mine and run the fix_mine1.exe
utility to delete them from the actual log that I will be sanding to the
ARRL; up to here all seems ok and logic, but the problem is that I'm
running Windows XP, and when I run fix_mine1.exe the program enters an
endless error loop with the message below.

INTERRUPT 0DH, GENERAL PROTECTION FAULT      possible illegal segment
error code = 019C
eax = 00000101      esi = 0000023C      flags = 3206        ds = 0000
ebx = 00004A0C      edi = 00000000      eip = 00000783      es = 0000
ecx = 00000000      ebp = 00C049E0      cs = 019F           fs = 018F
edx = 000003CE      esp = 000049DC      ss = 017F           gs = 0187
INTERRUPT 0DH, GENERAL PROTECTION FAULT      possible illegal segment
error code = 019C
eax = 00000101      esi = 0000023C      flags = 3206        ds = 0000
ebx = 00004A0C      edi = 00000000      eip = 00000783      es = 0000
ecx = 00000000      ebp = 00C049E0      cs = 019F           fs = 018F
edx = 000003CE      esp = 000049DC      ss = 017F           gs = 0187
INTERRUPT 0DH, GENERAL PROTECTION FAULT      possible illegal segment
error code = 019C
eax = 00000101      esi = 0000023C      flags = 3206        ds = 0000
ebx = 00004A0C      edi = 00000000      eip = 00000783      es = 0000
ecx = 00000000      ebp = 00C049E0      cs = 019F           fs = 018F
edx = 000003CE      esp = 000049DC      ss = 017F           gs = 0187
INTERRUPT 0DH, GENERAL PROTECTION FAULT      possible illegal segment

and keeps going for ever

I configured fix_mine1.exe to be run as a windows 95 emulation and the
results were just the same, it enters the same loop.

Now, is there a way to run fix_mine1.exe with CTWIN ver 9.77 to fix the
bad QSOs?

Thanks for your replay.

Joe, YV5LIX