[ct-user] DVP callsign function not working - FIXED!

[Steve Baron - KB3MM]

SET

by itself will display the whole environment.

----- Original Message -----
From: "K4SB" <k4sb at earthlink.net>
To: <ct-user at contesting.com>
Sent: Thursday, February 27, 2003 02:25
Subject: Re: [ct-user] DVP callsign function not working - FIXED!


> Robert Shohet wrote:
> > 2) I noticed the discrepancy when I checked the DVPPATH in the .bat
file.
> > HOWEVER, when you type "set dvppath" at the DOS prompt, DOS tells you
> > "Syntax error".
>
> Maybe I missed something but you can't just "set dvppath" without
> adding the actual path. So "SET DVPPATH=C:\CT\DVP" will educate DOS so
> you won't get the error.
>
> Incidentally, just a small trick, but whenever I change something in
> the autoexec or config files, I use lower case letters. If I don't
> hopelessly screw it up, I then change the systax to upper case. And I
> always keep backups of these 2 file elsewhere on the HD and on a
> floppy.
>
> 73
> Ed
>
> _______________________________________________
> CT-User mailing list
> CT-User at contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
>