[ct-user] CT COMTSR settings and OMNI VI settings that work?

[Jim White, K4OJ]

...I used to run a 6+ w/CT

Have you tried a hard reboot of the Omni?

I had to do that once - somehow the Omni picked up some static or loose 
electrons floating around the shack and got dumb...the rig seemed fine 
but its ability to communicate with the computer was hosed...

Forget the exact combination of which buttons you hold down as you turn 
the Omni on, but it is in the manual...

GL

Jim, K4OJ





Jim Brannigan wrote:
> Make sure that the baud rate is under 2400 and the C-Id matches (usually
> 04).  Try CdE ON and OFF until it works.
> 
> Jim
> 
> 
> 
>>Long time CT user with success with COMTSR settings for other devices
> 
> unable to achieve success with OMNI VI+. COM port and cable verified with
> TNC, but radio will not echo back to CT. Some success using CT to change
> radio band up or band down, and by direct frequency (number) input in
> callsign field but no radio echo and no band map change.
> 
>>Looking for OMNI VI+ and CT user who has solved the problem. Please reply
> 
> to ab9m at aol.com.
> 
>>Gary - ab9m at aol.com
> 
> 
> _______________________________________________
> CT-User mailing list
> CT-User at contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
>