[ct-user] Ten-Tec Orion

[K0HB & K0CKB]

I think the Ten-Tec control interface is an Icom clone.....  try different
Icom selections to see if one works. The most significant difference
between the various Icom radio selection is going to be the hex address, so
if you know the hex address of your Orion, select the Icom model with the
same address and it will probably play.  Below is a list of Icom radio
addresses except the recent 7x6 flavor models (706, 746, 756).

Model  	  Hex Address 	  
725 	= 28		
735 	= 04
737 	= 3C
751 	= 1C
761 	= 1E
765 	=  2C
775 	= 46
781 	= 26

73, de Hans, K0HB
--
   http://home.earthlink.net/~k0hb




> [Original Message]
> From: Bill Tippett <btippett at alum.mit.edu>
> To: <ct-user at contesting.com>
> Date: 11/5/03 7:55:51 PM
> Subject: [ct-user] Ten-Tec Orion
>
>
> Please consider support for Ten-Tec Orion. I used this radio in the CQWW 
> SSB and its front-end performance far exceeded anything I've used before 
> (TS-930S and FT-1000MP). Would be a shame to be forced to move to another 
> program after using CT for over 15 years.
>
> 73,  Bill  W4ZV
>
> _______________________________________________
> CT-User mailing list
> CT-User at contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web:  http://www.k1ea.com/