[ct-user] DVP's and IRQ Assignments

[Mark Bailey]

Hello, all:

I've never set up a system with a DVP before, for use with TRLog and CT.
The
default IRQ for the DVP is 7, which is also the default IRQ for LPT1.  Do
these
peacefully co-exist?  If you are using a DVP, how are the IRQ's (and, I
suppose,
base adresses) configured for use with TRLog and/or CT?  I know that, for
CT,
the serial ports need unique IRQ's, and that TRLog doesn't use the IRQ's for
serial ports.

This will be used with an SO2R Master on LPT1, with the paddle inputs.

Thanks in advance for the help.

73,

Mark, KD4D