[ct-user] CT and Icom-Radio

[John Bednar]

Fred,

CTWin does not support COM port keying. You need to use LPT port
keying. Be sure to set the LPT port to "AT-Compatible" in the BIOS
if the computer has a bi-directional LPT port.

John
k3ct at fast.net

-----Original Message-----
From: ct-user-bounces at contesting.com
[mailto:ct-user-bounces at contesting.com] On Behalf Of Manfred Ockert
Sent: Monday, November 22, 2004 5:17 AM
To: ct-user at contesting.com
Subject: [ct-user] CT and Icom-Radio

hello,
I am using here CTWin (with win98) and I have an IC737A with a
smal-and-simple-Interface,
(2 Trasistor-IF only)  powerd by RTS and DTR pin's of COM-Port!

Tried it with different Software ( N1mm-logger, Mixwin) and there it
works!
So would know, wha has same with CT working?!

Does CT set the DTR, RTS pin's to HIGH during init ???
or... where to get a (quick and dirthy) programme, to do it...

73
Fred
dl5ym
_______________________________________________
CT-User mailing list
CT-User at contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/