[ct-user] Hooking up ICOM 756proII

[Ed Parish K1EP]

Once you install CtWIN like any other windows program, you can hook up your Pro II to the com port.  Then on the com port setup menu specify radio 1 and the speed.  Set the Pro to a speed, avoid using auto speed setting.

At 11/27/2004 01:50 AM, bonemd wrote:
>Have long used CT in DOS and am now using the Windows Version 10. It seems to work well under Windows SE. Just bought an ICOM 756proII. I also bought the ICOM CT-17 and connected the wire from the ICOM to the CT17 and from the CT17 to an RS232 port.
>
>First of all, where is the software for the computer to control the ICOM... I did not get a CD etc. Should I not be able to control the rig through the computer?
>
>Second of all, how do I get CT to communicate with frequencies. On my old Kenwood I would type in frequency in CT and it would change on the transceiver, or change the transceiver and the log would change. I know I had to use that COMTRS or whatever but that was before windows.
>
>Anyone have experience with the ICOM 756proII??? How do I get CT windows up and running with it?
>
>Pleas help.
>
>Doc W9NY/V47NS
>
>Michael R. Treister, M.D., F.A.A.O.S., F.A.C.S., F.I.C.S.
>Orthopaedic and Hand Surgeon
>bonemd at ameritech.net
>OFFICE PHONE:   312-633-5866
>OFFICE FAX:   312-633-5867
>_______________________________________________
>CT-User mailing list
>CT-User at contesting.com
>http://lists.contesting.com/mailman/listinfo/ct-user
>CT on the web:  http://www.k1ea.com/