[ct-user] An easier way to create a bootable CD _ Roxio Easy CDCreator

Steve Baron - KB3MM SteveBaron at StarLinX.com
Tue Feb 1 18:16:22 EST 2005

iS THIS ON cd=rw DISKS?  cd=r?

----- Original Message ----- 
From: <kd4d at comcast.net>
To: <cq-contest at contesting.com>; <ct-user at contesting.com>
Sent: Tuesday, February 01, 2005 13:40
Subject: [ct-user] An easier way to create a bootable CD _ Roxio Easy

> Good morning, all:
> Mal, N7MAL, mentioned to me a much easier way to create a bootable
> DOS CD.  If you have Roxio Easy CD Creator (which I have pre-installed)
> on my Dell laptop computer (I have Version 5), you can start Easy CD
> Creator,  go to File->New CD Project->bootable CD, and you get
> a requestor for a file or floppy disk drive.
> If you don't have Roxio, you can download free tools from the Web
> to allow you to do this anyway, but it isn't as easy.  Let me know if
> you want the instructions for doing it the hard way!  :-)
> This is cool.  It looks like you can directly create a bootable CD from
> a floppy disk drive (or a disk device using VFD (Virutal Floppy Driver)
> if you don't have a disk drive.
> This way, you can configure a Windows 98SE boot floppy (basically
> DOS 7.1) the way you want it and instantly create a bootable CD!
> Thanks, Mal!
> 73,
> Mark, KD4D
> _______________________________________________
> CT-User mailing list
> CT-User at contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web:  http://www.k1ea.com/

More information about the CT-User mailing list