[ct-user] double callsigns

[Rick Saeger]

Thank you to all the responses..
The problem was cockpit problems on my side. I had connected my laptop
into my shack network using a hardwire Ethernet connection and failed to
disable my wireless card.
As soon as the wireless card was disabled all was normal.
Again thanks for all the help.
See you this weekend in the ARRL DX ssb test.
73,Rick K3OO




-----Original Message-----
From: ct-user-bounces at contesting.com
[mailto:ct-user-bounces at contesting.com] On Behalf Of Rick Saeger
Sent: Sunday, February 26, 2006 10:04 PM
To: 'Rick Saeger'; ct-user at contesting.com
Subject: Re: [ct-user] double callsigns

I get the same result even if I run it in the MS category .



-----Original Message-----
From: ct-user-bounces at contesting.com
[mailto:ct-user-bounces at contesting.com] On Behalf Of Rick Saeger
Sent: Sunday, February 26, 2006 8:03 PM
To: ct-user at contesting.com
Subject: [ct-user] double callsigns

I just installed CTwin 10.02.008.
Running in the M2 mode for the arrl dx contest I get double callsigns on
station 2 when I enter one callsign in station 1. I also receive double
packet spots/double gab info when I enter them from station one to
station two. The summary sheet is the same on both stations and is
correct.
The information from station 2 to station one is fine.
Any ideas?
Thanks,
Rick K3OO
 
 
 
 
_______________________________________________
CT-User mailing list
CT-User at contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/




_______________________________________________
CT-User mailing list
CT-User at contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/