[ct-user] Keying TS2000

[Larry]

I switched from a TS940 to TS2000 without a problem. One of the posts 
mentioned a paddle. The TS2000 has two jacks - one for a paddle and one for 
a key. The interface should connect to the key jack.

If you have not used the interface before you might need to check LPT 
addressing.

73, Larry  W6NWS
----- Original Message ----- 
From: "Bob Glasgow" <bob.gm4uyz at btinternet.com>
To: <ct-user at contesting.com>
Sent: Sunday, March 11, 2007 12:55 PM
Subject: [ct-user] Keying TS2000


Hi All,



Just to say that I have just bought a TS2000 and I tried it being keyed by
the computer and it gives the continuous tone. Having said that the cable I
am using is the one that I have used in the past with both CT and NA on
Yaesu Rigs. This is my first attempt with a Kenwood. By the way the same
effect happens when using the Logging Program Win-Test so in my opinion as I
have not investigated it yet is that it is probably the way that the TS2000
wants keyed.



When I get chance to look at the problem I will send out an email with the
answer, assuming someone doesn’t beat me too it.



Regards,







Bob Glasgow GM4UYZ



Sec: Cockenzie & Port Seton Amateur Radio Club

Email: HYPERLINK "mailto:bob.gm4uyz at btinternet.com"bob.gm4uyz at btinternet.com

Website: HYPERLINK "http://www.cpsarc.com"www.cpsarc.com

Tel: 01875 811723




-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.8/717 - Release Date: 10/03/2007
14:25




--------------------------------------------------------------------------------


> _______________________________________________
> CT-User mailing list
> CT-User at contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web:  http://www.k1ea.com/
>