[ct-user] CW on serial port

[Jim Reisert AD1C]

Are you using CT or CTWIN?

CTWIN does not support CW on a COM Port, see the download page:

"COM ports - Use -enet for networking over Ethernet. All comports work
for radios, TNC and networks. CW keying does not work on COM ports."

73 - Jim AD1C

On Thu, Dec 18, 2008 at 10:17 AM, poldo <poldo98 at alice.it> wrote:
> I use CT 9.92 and Windows 98SE via LPT1 for cw keying a TS940, everything
> work fine.
> Wishing work cw with my old TS830, I took away the 940 and LPT interface.
> I connected the TS830 to the serial port COM1 with a W2ENY interface (relay
> inside theconnector)
> Despite my attempts CT does not switch the relay inside the interface.
> I loaded COMTSR1 (9600 IRQ4 N82) and I tried other configurations, on CT
> radio setup I selected from NONE to all Kenwood rigs, I made all these
> attempts on Windows98/Prompt DOS and real DOS. Because I have also COM2 port
> I duplicate everything
> The COM ports are good (this Windows tells) the interface is ok (relay
> switch at 3,2 volt) but CT does not control any serial port.
> What can I try?  What I am wrong ??

-- 
Jim Reisert AD1C/Ø, <jjreisert at alum.mit.edu>, http://www.ad1c.us
"Let Not Mankind Bogart Love" - Willie Nelson