[ct-user] HELP - WANT TO GET BACK INTO WAE CONTEST!

[kd4d at comcast.net]

Hi Andy:

Try adding this line to config.sys, after emm386...I'd put it at the end:

DEVICEHIGH=C:\DOS\ANSI.SYS

Let us know if this helps.

73,

Mark, KD4D

----- Original Message -----
From: "AK" <K4YKZ at ARRL.NET>
To: ct-user at contesting.com
Sent: Saturday, August 8, 2009 9:30:53 AM (GMT-0400) Canada/Atlantic
Subject: Re: [ct-user] HELP - WANT TO GET BACK INTO WAE CONTEST!

HELP HELP HELP
My DOS CT10 program crashed last night.
May have been a line voltage problem.
Other than for CT10 now, the old AT (used for this many years) is working.
Reloaded CT10 program, and things got worse: now all I get is "ANSI.SYS must 
be installed" complaint.
ANSI.SYS is in the c:\DOS directory, and c:\DOS is included in the active 
path.
A\suggestions on what happened and what it should take to get back in the 
contest - much appreciated.

K4YKZ, Andy



_______________________________________________
CT-User mailing list
CT-User at contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/