[ct-user] Savelog & Autosave

[Dan Z]

The substitute command didn't work for me when I tired it a while back.  Also tired to assign the drive with same results.


Dan Zeitlin - K2YWE
South Shore ARC - K3AU
Annapolis, Maryland
http://danzee.org


--- On Wed, 12/2/09, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> From: Bob Wilson, N6TV <n6tv at arrl.net>
> Subject: Re: [ct-user] Savelog & Autosave
> To: "Henry Eveland" <kc2ta at verizon.net>, "CT Reflector" <ct-user at contesting.com>
> Date: Wednesday, December 2, 2009, 7:09 PM
> On Tue, Dec 1, 2009 at 1:06 PM, Henry
> Eveland <kc2ta at verizon.net>
> wrote:
> 
> > With the savelog and autosave commands, CT save
> directly to A:\.
> > Unfortunately, the new computer in the shack - a
> hand-me-down P4 does not
> > have a floppy drive.  How does one change the
> default drive to which
> > savelog
> > & autosave are tied?
> >
> 
> Try the DOS "substitute" command before starting CT, e.g.
> 
> SUBST A: C:\temp
> 
> Then when CT writes to "A: disk" the files will actually be
> written to drive
> C: in the *temp* directory, or anywhere else that you like
> (a second hard
> disk would be the best place).  The directory must
> exist before you run
> SUBST.
> 
> SUBST /D
> 
> deletes the drive mapping (but not the files, they remain
> in C:\temp).
> 
> SUBST
> 
> with no arguments lists the current substitute drive letter
> mappings, if
> any.
> 
> 73,
> Bob, N6TV
> _______________________________________________
> CT-User mailing list
> CT-User at contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web:  http://www.k1ea.com/
>