[ct-user] Fw: RE: K1EA/Harvard Radio DVP pinout help pse

[Karl Brandt]

--- On Wed, 2/18/09, Karl Brandt <nd8dx at yahoo.com> wrote:

From: Karl Brandt <nd8dx at yahoo.com>
Subject: RE: [ct-user] K1EA/Harvard Radio DVP pinout help pse
To: "Ted Bryant" <W4NZ at comcast.net>
Date: Wednesday, February 18, 2009, 8:21 PM







Hi Ted, 
 
Thank You for the PDF of the manual. The only thing confusing abt the cable is the lack of nomenclature such as the usual "input"/ "output"...I wud assume tt the "mic jack" ( to pin 3) wud be the input and the "mic plug" ( to pin 1) wud be the output....however the used cable I recieved is marked "mic" on the pair tt goes to pin 1 ...completely opposite of what
I wud expect based on the use of the terms plug and jack in the drawings.  Hope tt makes sense...so now the question is which is right... is the mic input to the DVP pin 1 or 
pin 3 ??
 
73's  TU  Karl

--- On Tue, 2/17/09, Ted Bryant <W4NZ at comcast.net> wrote:

From: Ted Bryant <W4NZ at comcast.net>
Subject: RE: [ct-user] K1EA/Harvard Radio DVP pinout help pse
To: nd8dx at yahoo.com
Date: Tuesday, February 17, 2009, 11:23 PM

Karl,

See attached.  Hope this helps.

73, Ted W4NZ

-----Original Message-----
From: ct-user-bounces at contesting.com
[mailto:ct-user-bounces at contesting.com]On Behalf Of Karl Brandt
Sent: Wednesday, February 18, 2009 5:02 AM
To: ct-user at contesting.com; Dennis V
Subject: [ct-user] K1EA/Harvard Radio DVP pinout help pse


Hi,
 
I recently picked up a DVP card (rev. C)and an unterminated cable, sadly no
manual. Was wondering if someone can pse tell me which pins on the DB15 are
mic line/ptt output to the rig.
 
73's TIA   Karl ND8DX