[Fourlanders] 6 meter power divider

[Jim Worsham]

We used to have a bunch of that Belden 72 Ohm coax just for that
application.  Check with Bob, W4ZST.  It is probably in his basement
somewhere!

73
Jim, W4KXY

-----Original Message-----
From: fourlanders-bounces at contesting.com
[mailto:fourlanders-bounces at contesting.com] On Behalf Of Rogers, Ron
Sent: Monday, August 18, 2008 10:44 AM
To: Fourlanders Contest Group
Subject: [Fourlanders] 6 meter power divider

Does anyone in the group have a 2 port power divider for 6 meters that I
can use with 50 ohm coax for this stacked 6 meter Squalo antenna
experiment I am trying to put together for the W4NH Sept. contest effort
?  

Or, does anyone have an old set of 3/4 wavelength (118")  72 ohm phasing
harnesses that were originally cut for stacking 6 meter antennas ? 

Otherwise, I will have to obtain about  20 feet of Beldon 8213 (72 ohms)
to build some phasing harnesses.

I have to stack these antennas 12 feet apart on a vertical mast pipe,
hence the 3/4 wavelength feed lines requirement.

Ron 
WW8RR


_______________________________________________
Fourlanders mailing list
Fourlanders at contesting.com
http://lists.contesting.com/mailman/listinfo/fourlanders