[Fourlanders] F-connector crimper

[Tom McElroy]

I'll look also, guys.  I have several compression tools for F, and other
connectors for RG-58 and RG-59,
but I never had need to see if they handle RG-11.   But maybe I should!

Tom
W4SDR


On Tue, Nov 5, 2013 at 12:22 PM, Kos <kosmetatos at gmail.com> wrote:

> Bob,
>
> I believe these are compression fittings. I have a compression F tool, but
> I'll have to dig it out, as I have put most of my cabling supplies and
> tools in storage.
>
> I'll take a look tonight and see if I can retrieve it.
>
> Kos
>
>
>
> On 11/5/13 11:53 AM, w4zst at windstream.net wrote:
>
>> Does anyone have an "F" connector crimp tool that will handle RG-11 cable
>> crimp connectors?  I have a regular one, but it won't do that large
>> connector.  I know they are available, but I hesitate to spent $30 to crimp
>> just four ends that I need.
>>
>> The connectors I have are Ideal 89-211 and are going on Belden 9292 cable.
>>
>> I'd sure like to borrow such a critter if anyone close by has one.
>>
>> Thanks, Bob
>>
>>   _______________________________________________
>> Fourlanders mailing list
>> Fourlanders at contesting.com
>> http://lists.contesting.com/mailman/listinfo/fourlanders
>>
>
> _______________________________________________
> Fourlanders mailing list
> Fourlanders at contesting.com
> http://lists.contesting.com/mailman/listinfo/fourlanders
>
-------------- next part --------------

   I'll look also, guys.  I have several compression tools for F, and other
   connectors for RG-58 and RG-59,
   but I never had need to see if they handle RG-11.   But maybe I should!
   Tom
   W4SDR

   On Tue, Nov 5, 2013 at 12:22 PM, Kos <[1]kosmetatos at gmail.com> wrote:

     Bob,
     I believe these are compression fittings. I have a compression F tool, but
     I'll have to dig it out, as I have put most of my cabling supplies and
     tools in storage.
     I'll take a look tonight and see if I can retrieve it.
     Kos

   On 11/5/13 11:53 AM, [2]w4zst at windstream.net wrote:

     Does anyone have an "F" connector crimp tool that will handle RG-11 cable
     crimp connectors?  I have a regular one, but it won't do that large
     connector.  I know they are available, but I hesitate to spent $30 to
     crimp just four ends that I need.
     The connectors I have are Ideal 89-211 and are going on Belden 9292 cable.
     I'd sure like to borrow such a critter if anyone close by has one.
     Thanks, Bob
       _______________________________________________
     Fourlanders mailing list
     [3]Fourlanders at contesting.com
     [4]http://lists.contesting.com/mailman/listinfo/fourlanders

   _______________________________________________
   Fourlanders mailing list
   [5]Fourlanders at contesting.com
   [6]http://lists.contesting.com/mailman/listinfo/fourlanders

References

   1. mailto:kosmetatos at gmail.com
   2. mailto:w4zst at windstream.net
   3. mailto:Fourlanders at contesting.com
   4. http://lists.contesting.com/mailman/listinfo/fourlanders
   5. mailto:Fourlanders at contesting.com
   6. http://lists.contesting.com/mailman/listinfo/fourlanders