[Fourlanders] Fwd: [wsjt-devel] Mock "FT8 Roundup" Contest
Bill Pence
pence.bill at gmail.com
Wed Oct 17 10:46:48 EDT 2018
If you are available, please consider downloading the rc3 and wsjt-x
package and participating.
---------- Forwarded message ---------
From: Joe Taylor <joe at princeton.edu>
Date: Wed, Oct 17, 2018, 10:17 AM
Subject: [wsjt-devel] Mock "FT8 Roundup"
A one-hour "practice contest" will be held next week using the FT8 mode
and the ARRL RTTY Roundup rules.
Thursday, 25 October 0200-0300 UTC (Wednesday evening, NA time)
Dial frequency 7.078 (and higher, in 2 kHz increments, if too much QRM).
Everyone works everyone.
To participate you must use WSJT-X 2.0.0-rc3. Installation packages for
Windows, Linux, and macOS can be found near the bottom of this web page:
https://physics.princeton.edu/pulsar/k1jt/wsjtx.html
Note that this Release Candidate 3 ("RC3") is a beta-test version. A
full release of WSJT-X 2.0 is targeted for release on December 10, 2018.
A revised Quick-Start Guide to WSJT-X 2.0 for RC3 is posted here:
https://physics.princeton.edu/pulsar/k1jt/Quick_Start_WSJT-X_2.0.pdf
Be sure to read this entire document before using WSJT-X 2.0. Changes
in RC3 relative to RC2 are described starting on page 7.
IMPORTANT FOR THE MOCK CONTEST:
1. On the *Settings | Advanced* tab, be sure to check the boxes *Always
generate 77-bit messages*, *Decode only 77-bit messages*, and *ARRL RTTY
Roundup*. In the field labeled "Exch" enter the 2- or 3-letter
abbreviation for your state or province (US/Canadian stations) or DX if
you are not in the US or Canada.
2. Be sure that 7.078 appears in your drop-down frequency list for FT8
mode. You might need to do a *Reset* on the *Settings | Frequencies*
tab. If the sub-band starting at 7.078 becomes over-crowded we suggest
moving to higher dial frequencies in 2 kHz increments: 7.080, 7.082,
etc. Type Ctrl+Shift+F12 to move up by 2 kHz, Ctrl+Shift+F11 to move
down by 2 kHz.
3. Do not use a compound or nonstandard callsign in this event.
Note that planning is underway for one or more dedicated FT8 contests to
be held in the next few months. The ARRL RTTY Roundup, January 5-6 2018,
encourages FT8 as well as RTTY participation.
Post results and comments here so we can all learn from an actual FT8
contest-like experience.
If you are not already subscribed, you may wish to join the email list
wsjt-devel:
https://sourceforge.net/p/wsjt/mailman/?source=navbar
That list is the best way to communicate directly with the WSJT
Development Group.
-- 73, Joe, K1JT
_______________________________________________
wsjt-devel mailing list
wsjt-devel at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/fourlanders/attachments/20181017/19944f15/attachment.html>
More information about the Fourlanders
mailing list