[Fourlanders] resistors needed

[John Ackermann. N8UR]

Hi Bob -- if all else fails, I have plenty of 10k 0805 and would be happy to drop some in an envelope to you.

On Oct 30, 2018, 11:29 PM, at 11:29 PM, Bob Lear <w4zst at windstream.net> wrote:
>the next two sizes could also be used.   0603 would fit on the pads and
>
>I could make an 0805 work diagonally.  there is height room ok to do 
>that.  thanks
>
>
>On 10/30/2018 7:01 PM, Bob Lear wrote:
>> I am in need of 5 or 6 resistors:   10K ohm   0402 surface mount 
>> (1.0mm long)
>> These are tiny little devils and I accidentally knocked some off a 
>> circuit board trying to remove another part.  I have been able to 
>> solder a couple back on that I found but still missing 5.  My
>smallest 
>> soldering iron tip is wider than these are long but I was able to do
>it.
>>
>> If anyone has any to spare, I will be at the Stone Mountain Hamfest 
>> this weekend and unlikely to find any there I would think.
>>
>> Thanks, Bob
>> _______________________________________________
>> Fourlanders mailing list
>> Fourlanders at contesting.com
>> http://lists.contesting.com/mailman/listinfo/fourlanders
>> Sent to: w4zst at windstream.net
>
>_______________________________________________
>Fourlanders mailing list
>Fourlanders at contesting.com
>http://lists.contesting.com/mailman/listinfo/fourlanders
>Sent to: jra at febo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/fourlanders/attachments/20181031/d4da9022/attachment-0001.html>