[Mldxcc] Dell One Day Sale

[Jim Venneman]

Ray,
   
  Have you checked out the Microham website for information about your setup with N1MM? I bought a Microham Microkeyer at Dayton and it works great. Going through the setup to have the unit work with my IC-765 was pretty easy. However, I could not get the thing to work with N1MM at all. So, I checked the N1MM website and downloaded their specific instructions on how to configure the N1MM software to work with the Microkeyer. I followed their instructions and it has worked great ever since. Already been through two contests with the Microkeyer with no glitches at all. If not for the instructions from the website, I doubt that I would have ever figured it out. The configuration is not very intuitive, but it works good, like I said.
   
  Sorry about the 1A0. I got lucky - worked them on 30, and on 20 cw & ssb for a new one (#311). They didn't show up on 20 until late in the week of their operation. However, they arrived with a bang (good sigs) on cw and even stood by for the west coast for about 20 minutes one night. I just happened to be sitting on 14195 on another night when they called CQ and worked them right away. They were only just above the noise that time.
   
  See ya in the pileups,
   
  Jim  -WX6V-

Raymond Parker <nd6sarrl at sbcglobal.net> wrote:
  Check Dell Direct for a dual core desktop with 17" flat screen for $399...You can be serial port challenged, too. 
I missed the 1A0 last week...I heard them on 20 ssb once.
I had a good run in IARU Sat evening...mostly west coast and lots of W6's. Seemed like CQP! 466 Q's, maybe 50 mults. 
...still struggling with the microHam USB interface...driver and 746 combination with N1MM.
I hope to work this out before CQP, 

CU in CQP and at the next meeting. Ray
_______________________________________________
Mldxcc mailing list
Mldxcc at contesting.com
http://lists.contesting.com/mailman/listinfo/mldxcc