[Mldxcc] ARRL RTTY

[James]

Cool, glad to hear I'm not the only FLDIGI user out there (except I
use Win 7)... there shouldn't be a MMTTY MM-onopoly  : - )

While S&P I like to leave my rig's DSP wide open so I see ~ 2500 kHz
width on FLDIGI's waterfall and then tune the VFO to place 2 or 3
signals around the 1000 to 1500 Hz offset zone. Then I can mouse click
each signal without re-tuning the VFO. If QRM or AGC de-sense is a
problem then I'll use my rig's DSP to narrow down to 400 if needed.
-- 73 Jim K6OK

On 1/3/13, Doc Dashiell <placerdoc at sbcglobal.net> wrote:
> Gentlemen:
>
> I use a entirely different technique.  Being the linux lover that I am,
> I use fldigi afsk.  When I S&P, I shut the dsp filter down to about 350
> and use the cat control to work up frequency 300 or 400 at a time.