[Mldxcc] K1N (now RTTY)

[K6LE - Rick]

I'm sure there are several ways to accomplish this but this is how I do it on my K3.

I have the second receiver. I feed the Left channel of my stereo sound card to one instance of MMTTY and the Right channel feeds a second instance of MMTTY to the Sub receiver.

No switching back and forth just sit and copy both the DX and the pile up.  

If I'm not contesting but just chasing DX then I usually use WinWarbler (part of the DXLabs Suite) and since it can handle two decode windows I again feed Left to the main and Right to the Sub. 

Also, if I am an anti-Windows mood I can do the same using cocoaModem on the Mac since it also has two waterfalls.

BTW, being able to do this is one of the several reasons I am not a fan of the popular Signal Link interface since it is mono only.

Rick
K6LE


> On 2/17/2015, at 4:22 , Robert Hess via Mldxcc <mldxcc at contesting.com> wrote:
> 
> Just wondering how the RTTY guys are doing this.  A decoder on the second receiver?  I didn't try to work them on RTTY but in the past I have just listened for a carrier dropping off about the same time the DX responds.  Not very scientific, I know.
> 
> Bob