packetcluster/na problem

[Srockn4sr@aol.com]

Hi

am trying to get NA to work with my packetcluster node.  No matter what combo
of params I try, I cannot get it to work.  Wonder if any packetcluster sysops
are using NA and could give me some help on this.

I am using BPQ on my packetcluster puter.  I have a null modem cable running
from a defined bpq port to a serial port on my contest puter     using com 2
for this puter.  i have tried using the bpq param with interupt set at 127
 and i get no response when i try to access the packetcluster node.  Is there
a command I need to issue to establish a link?  I have tried the  LOCAL param
with a console 2 enabled on the packetcluster.  if i do a command from the NA
puter   it goes to the cluster computer   BUT the response to my command is
printed out on the bottom screen of the packet cluster puter!

In an older version of NA   i used the LOCAL param and had console 2 enabled
on the cluster puter, and all worked just fine, unfortunantly  the older
version didn't support yaesu radios   which is why i have gone to the new
version  (9.27)

if anybody can give me some help on this i will surely appreciate it.

73   steve  n4sr    srockn4sr@aol.com


--
Submissions:              na-user@ve7tcp.ampr.org
Administrative requests:  na-user-REQUEST@ve7tcp.ampr.org
Questions:                owner-na-user@ve7tcp.ampr.org