[na-user] Packet Problems

[Jamie Tolbert]

May seem silly but make sure the KAM is not in host mode....if you use
another program (KAGOLD, HOSTMASTER, etc) it may leave the tnc in host mode
when you exit.

73 Jamie WW3S

-----Original Message-----
From: w4lc <w4lc@fuse.net>
To: na-user@contesting.com <na-user@contesting.com>
Date: Saturday, March 11, 2000 7:27 AM
Subject: [na-user] Packet Problems


>
>I need some help from the relectorees.
>
>My NA (v10.45) no longer communicates with my TNC.   It used to work fine.
>No longer.  However, it still communicates with my radio ok. I have a KAM
>Plus on COM1 and a TS850 on COM2.
>
>The settings still look ok:
>
>COM1  4800 baud IRQ 4
>COM2  4800 baud IRQ 3
>Xcvr: Kenwood1
>TNC Type:  Local
>
>I have the TNC and radio selected in the equipment screen.  I also have
>packet spots enabled.  However, the program does not receive ANY packets in
>the packet screen.  It also will not send a command to the TNC.  The TNC is
>working fine since I can send and receive packets with a couple of other
>programs.
>
>I have corresponded with K8CC.  He suggested a couple of things which I
>tried, i.e. testing the comport by shorting pins 2 and 3, then typing a
line
>into the packet window.  This echoed back, indicating the comport and
>program are working together ok.  Also checking the KAM to assure that the
>baud rate is the same as NA is set for.  They both are set for 4800, so
this
>is ok.
>
>Any ideas appreciated.
>
>Jim                W4LC
>
>
>
>
>--
>Submissions:              na-user@contesting.com
>Administrative requests:  na-user-REQUEST@contesting.com
>WWW:                      http://www.contesting.com/datom/
>Questions:                owner-na-user@contesting.com
>


--
Submissions:              na-user@contesting.com
Administrative requests:  na-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/datom/
Questions:                owner-na-user@contesting.com