[NA-User] Fw: [CQ-Contest] Internet packet feeds to other software

[Greg Richard]

Henry,

Try this for starters.  It worked for me but you are using a new revision of
the software

Greg K4NO


----- Original Message ----- 
From: "Chris Tran GM3WOJ" <gm3woj at talk21.com>
To: <cq-contest at contesting.com>; "Bob, N5RP" <N5RP at pdq.net>
Sent: Wednesday, April 10, 2002 1:58 PM
Subject: Re: [CQ-Contest] Internet packet feeds to other software


> Hi Bob et al
>
> I've been experimenting connecting NA to a DXCluster node
> using Telnet - K1TTT's WinTelnetX 4.11
> The configuration below works successfully for NA 10.54, so
> I guess should be OK for NA 10.55, which I have not had time
> to try yet.    I'm using 2 PCs networked with NA, and a third PC
> running WinTelnetX under W98.    For simplicity the set-up
> below uses COM1 on the Windows PC,  and COM1 on one of the
> networked NA PCs.   The DXCluster node I use (GB7BIG) is
> running AR-Cluster software.
> ---------------------------------------
> Connect together the COM ports on the 2 PCs (1 x NA PC
> and 1 x WinTelnetX PC) using a serial cable where pin2 at one end
> connects to pin3 at the other end and vice versa.
> -------------------------------------------
> NA 10.54
> Under  'Config', select f4   Serial Port Setup :
> port           adr     baud     device   IRQ
> COM1     3F8     9600      TNC       4
>
> Select f5   Equipment Configuration :
> TNC Type :   LOCAL
> ----------------------------------------------
> WinTelnetx 4.11
>
> COM
> Select - Add new   ComPort :
> Port    COM1
> Baud   9600
> Bits      8
> Parity   None
> Stop bits   1
> Flow    RTSCTS
>
> Name    COM
> Is TNC   False
> Buffer    32000
> Keep alive time  0
> Port Data Type  CT User
> Dupes     0
> CR/LF     1
>
> TEL
> Select - Add new     Network -  Connect :
> Host name or IP     marnet.dns2go.com
> Port number           23
>
> Name      TEL
> Is TNC     False
> Buffer       32000
> Keep alive time   0
> Port Data Type    Cluster User
> Mycall       INET
> Antiloop Px    <
> Dupes            0
> CR/LF            2
>
> Prompt      call:       Response    GM3WOJ
>
> Add - Routes       COM <-> TEL    2-way
> --------------------------------------------
>
> Hope this helps anyone who's trying to do the
> same thing - the advantage of this over DXTelnet
> is that only 2 pieces of software are running.
>
> 73
> Chris     GM3WOJ
>
>
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>