[NCC] Dayton Flea Market Stuff

[Jimk8mr at aol.com]

As long as we're doing pre-Dayton advertising, here are a couple of things  
I have for sale, though that I will take to Dayton only if I have a buyer 
lined  up:
 
Aluminum tube, 12ft x 2.5" x 0.25 wall 6061-T6   $150.
  
 
I five 125 foot pieces of LDF5-50A 7/8" 50 Ohm hardline, N-Male to  
N-Female. These were runs inside a building, so have never been out in the  
weather. $200 per piece. I expect to bring one or two pieces to Dayton, but  if you 
would like more (or maybe spare me hauling it to Dayton, and  you hauling 
it back) let me know.

 
I also have a 32 ft aluminum mast: a main piece of 24 ft x 3" x 0.25 "  , 
with a 10 ft extension of 2.375" x 0.25", drilled and tapped holes with  
hardware and appropriate shims, and two bushings for mounting on rotator shelves 
 (shelves no included). I can bring the short piece and hardware to Dayton, 
the  long piece would have to be picked up in Cleveland or shipping 
arranged. Asking  $400 for the works. Can provide photos with more details.
 
 
 
73  -  Jim  K8MR