[NCC] HELP !!! w/ K3 / N1MM / 2 Tone / RTTY Setup

[Ken Kontor]

Ray, ND8L - Jamie, WW3S - George, K3GP, Jeff, W2FU

I have run RTTY using WriteLog & MMTTY with my K3, transmitting FSK with 
a transistor keying interface with good success.

I would like to try 2 Tone (which I am told receives better than MMTTY) 
but it doesn't interface with WriteLog.

I have downloaded N1MM, MMTTY, 2 Tone, and FLdigi. I have set up N1MM to 
use MMTTY for transmit and both MMTTY and 2 Tone in separate receive 
windows. I would like to transmit using MMTTY and EXTFSK, but I have 
read that this doesn't work with Windows & 2 Tone and will produces an 
erratic keying wave forms.

G3YYD's 2 Tone site recommends using FLdigi Pseudo FSK (Rt Channel) 
function to key the transmitter using an Audio to FSK keying circuit 
which I could build.

At this point I am pretty much totally confused as to what to do and how 
to set up N1MM. I suspect the first setup would be the Master D! window 
using FLdigi for transmit, a second RX window using 2 Tone for receive, 
and possible a third RX window using MMTTY for receive, but as I said, 
I'm pretty confused at this point.

Can you guys offer any suggestions as to how to proceed?
Are you using K3's ? N1MM ? 2 Tone ? Please help !!!

Ken - W8KEN

PS: Anyone else using this K3, N1MM, 2 Tone setup ?
       Any suggestions on how to proceed will be greatly appreciated.
        Jeff, W2FU - Any other suggestions ? _ Ken