[NCC] HELP !!! w/ K3 / N1MM / 2 Tone / RTTY Setup

[Ray Fallen]

Guys...

Had it working fine until I went to the new improved version.

We couldn't (read K3GP and WW3S) couldn't get it to work in VP9

Not much help...

Sorry

Sent from my iPad

> On Oct 9, 2013, at 12:20 AM, Ken Kontor <w8ken at yahoo.com> wrote:
> 
> Ray, ND8L - Jamie, WW3S - George, K3GP, Jeff, W2FU
> 
> I have run RTTY using WriteLog & MMTTY with my K3, transmitting FSK with a transistor keying interface with good success.
> 
> I would like to try 2 Tone (which I am told receives better than MMTTY) but it doesn't interface with WriteLog.
> 
> I have downloaded N1MM, MMTTY, 2 Tone, and FLdigi. I have set up N1MM to use MMTTY for transmit and both MMTTY and 2 Tone in separate receive windows. I would like to transmit using MMTTY and EXTFSK, but I have read that this doesn't work with Windows & 2 Tone and will produces an erratic keying wave forms.
> 
> G3YYD's 2 Tone site recommends using FLdigi Pseudo FSK (Rt Channel) function to key the transmitter using an Audio to FSK keying circuit which I could build.
> 
> At this point I am pretty much totally confused as to what to do and how to set up N1MM. I suspect the first setup would be the Master D! window using FLdigi for transmit, a second RX window using 2 Tone for receive, and possible a third RX window using MMTTY for receive, but as I said, I'm pretty confused at this point.
> 
> Can you guys offer any suggestions as to how to proceed?
> Are you using K3's ? N1MM ? 2 Tone ? Please help !!!
> 
> Ken - W8KEN
> 
> PS: Anyone else using this K3, N1MM, 2 Tone setup ?
>      Any suggestions on how to proceed will be greatly appreciated.
>       Jeff, W2FU - Any other suggestions ? _ Ken
> 
> 
> 
> 
> _______________________________________________
> NCC mailing list
> NCC at contesting.com
> http://lists.contesting.com/mailman/listinfo/ncc