[NCC] N1MM+ Time interpolation problem

[Jim K8MR via NCC]

I've had an N1MM+ issue for which submitting a bug report and posting 
to the MM+ reflector has had no response. I can repeat the problem. 
Might somebody else check this out to see if the problem is repeatable 
by others?  Or am I doing something wrong? A small test log with a few 
qsos ought to be enough for a test.


The adjust time function seems to be busted in MM+. Doing the time
adjust process also causes an alphabetic sort of the calls in the log.

In the log window I left click on the first QSO line to be adjusted, 
right click, and
select and enter the Start Interpolation Time.

I then left click on the last QSO line to be adjusted, right click. The
Start Interpolation Time choice is not greyed out.

I go ahead and select Stop Interpolation Time and enter the end time.

The window asks if QSOs 0 (not one) through the last one are to be
adjusted.  I say yes.

The times are properly interpolated, but the QSOs are also 
alphabetically
sorted by callsign, now with interpolated times, i.e. but no longer in 
the order
the QSOs were made.


I have been using the most recent versions of MM+, WIN 7.

I have done this time adjustment process with MM classic, no problems.

???


Tnx & 73  -  Jim  K8MR