[NCC] FW: [ham] [RDXA] For Sale DXE Reversible Beverage Antenna Systems (3 available)

[Green Heron Engineering]

-------- Forwarded Message -------- 


Subject: 

[ham] [RDXA] For Sale DXE Reversible Beverage Antenna Systems (3 available)


Date: 

Fri, 24 Jun 2016 19:43:17 -0400


From: 

Joe Wilkowski via RDXA  <mailto:rdxa at rdxa.com> <rdxa at rdxa.com>


Reply-To: 

Joe Wilkowski  <mailto:k8fc at k8fc.com> <k8fc at k8fc.com>


To: 

rdxa at rdxa.com



Included with EACH of these bi-directional receive  systems is approximately
600 feet of 450 ohm open wire high quality Wireman wire. These systems have
allowed me to work 280 countries on 160 alone.
Price for each system $250





DX Engineering Reversible Beverage Antenna System Combos


DX Engineering Reversible Beverage Antenna System Combos allow two Beverage
antennas to be switched to receive in opposite directions while sharing the
same physical space. These exciting new reversible Beverage combos include
DX Engineering's superb receive preamp!

Dramatically improved weak signal results can be achieved on MW, BCB, 160,
80 and 40 meter bands and shortwave bands with receive-only Beverage wire
antennas that are typically 350 to 800 feet long, depending upon the lowest
band of interest.

DX Engineering Reversible Beverage System Combos are immune to the strong
signal overload and core saturation common in multi-transmitter contesting
environments. Reversible Beverages have two antenna F connectors; one "Away"
port for the default end-fire receiving pattern off the end of the wire, and
one "Toward" port for the opposite direction. Applying a negative 10 to 18 V
DC to the feedline switches the system between the two antenna ports for
reception in opposite directions.

You can build a 4-direction receive antenna system with two reversible
Beverage systems and one DX Engineering RLS-2 Two-Port Receiving Switch that
also requires only one feedline! The optional DX Engineering Feedline
Voltage Coupler, model DXE-FVC-1 is highly recommended to provide all of the
required feedline voltage injection. Plus, the optional DXE-EC-4 BCD Control
Console completes the system for four-direction switching right in the
shack.

These RBS systems will work with any 300-600 ohm 2-wire line. For best
low-loss low-noise results, use DX Engineering flooded or quad-shielded
75-ohm coax; with our F-type compression connectors to ensure a weatherproof
installation.

Photo link below:

https://goo.gl/photos/BbzVLC4P1mWCSZCP8




 

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Attached Message Part.txt
URL: <http://lists.contesting.com/pipermail/ncc/attachments/20160625/cc5e551b/attachment.txt>