[NCC] Misc equipment for sale

[Eric NO3M]

Note: Some stuff will be posted on QRZ, anything unsold will be taken to 
Dayton (vendor spot 9060 along the outside of the track)

(1) TS590-SG HF transceiver

(1) Ten Tec Centurion Amplifier (dual 3-500Z)

(2) Microham Stationmaster antenna switch controllers

(1) LP-100A wattmeter with HF coupler

(1) Vibroplex Champion bug

(2) KK1L 2x6 antenna switches mounted in fiberglass enclosures with PVC 
fitting openings in bottom for cables

(50+) 4 ft copper clad ground rods w/ clamps

(18) feedpoint (XFMR, gas tube, F-conn, box) and termination (Ohmite 
res. + gas tube) hardware for beverage antennas (all homebrew)

(4) Homebrew Feedpoint chokes, Carlon box w/ SO-239 and antenna posts, 
mounted on DXE "T" insulator, #31 core w/ mini teflon coax. Good for 
dipoles, delta loops, etc. Same arrangement as DXE feed chokes. Will 
handle legal limit pwr.

(1) complete single band 8-circle array receive antenna using Hi-Z brand 
buffer amps and W9RE BSEF phasing controller. Includes verticals. 
Spacing determines band of operation (160, 80, 40, etc.). Will consider 
splitting up if someone is only interested in the Hi-Z stuff or phasing box.

(1) 160M Four Square transmit array package. Includes 8-direction + OMNI 
custom built controller, (1) dummy load (oil bucket), (4) heavy duty 
tilt mounts, (4) DXE stainless radial plates, (4) 1/4w feedlines, your 
choice of 50 or 75 ohms, (4) 88 ft verticals = lower 25ft thick wall 
starting at 3 in., next 40 ft double thickness, last 22ft single layer 
"stinger" down to 1/2 in.
If the 160M Four square package doesn't sell by Friday morning at 
Dayton, it will be parted out.

(3) DXE stainless radial plates (not part of 160m 4sq system)

Other misc items such as RG8 (DXE) and RG8X (DXE) coax of various 
lengths w/ DXE solder/crimp terminations, smaller dia. aluminum tubing 
for short verticals (<35ft) or yagi elements. Possibly more as I sort 
through stuff.

If interested in anything, please inquire off list.  Thanks!

73 Eric NO3M

no3m at no3m.net  -or-  e.tichansky at gmail.com