[Nodxa] [NCC] K3 KIO3B RTTY question

[Jamie WW3S]

in MMTTY, under Options/Setup MMTTY soundcard tab, on the right side of the 
screen, do you have the K3 USB codec selected under transmit?

-----Original Message----- 
From: Dan
Sent: Tuesday, January 10, 2017 10:24 AM
To: ncc at contesting.com ; nodxa at contesting.com ; mrrc at contesting.com
Subject: [NCC] K3 KIO3B RTTY question

This past weekend I did the ARRL RTTY RU with the K3. I have the USB KIO3B 
installed and tried to use the built in sound card. The receive part of the 
audio chain worked fine but I could get no transmit audio. I used my SIgnal 
Link to XMIT.
After the test I dug into the problem and am stumped. Nothing I do gets the 
RTTY audio to the K3 USB card. The Windoze widget says the MMTTY audio is 
there but the radio doesn’t key (using VOX) even if I put it in transmit 
manually.
I’ve tried resetting everything and the computer sees the KIO3B as an audio 
USB codec as it should. I tried setting the mike input to LINE to no avail. 
I’ve disabled all other audio devices. I sacrified a chicken to JOBOO but no 
joy.

I’m hoping there is a simple setting I’m overlooking and hoping someone with 
a K3 or K3s has an idea.

Thanks
Dan W8CAR
_______________________________________________
NCC mailing list
NCC at contesting.com
http://lists.contesting.com/mailman/listinfo/ncc


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7996 / Virus Database: 4749/13740 - Release Date: 01/10/17