[Orion] Firmware upgrade and CW/ACOM2000A issue again

[Richard Detweiler]

I don't know the way the Acom is connected,

However, there are a couple of controls that will lengthen the delay between 
the amplifier action and the start/end of the signal.

These are the "EXT T/R Delay 1" and 2 in the TX menu and the "CW QSK Delay" 
in the CW menu.

The 1st is for Non QSK set up,  the second is for a QSK set up.

Read up on those two and see if they will help solve the problem.

thanks
Rich
K5SF

>From: n1eu at netscape.net (Barry N1EU)
>To: tentec at contesting.com, Orion at contesting.com
>Subject: RE: [Orion] Firmware upgrade and CW/ACOM2000A issue again
>Date: Sat, 04 Dec 2004 07:53:42 -0500
>
>"Sergei Kulyov" <ua3ap at smtp.ru> wrote:
>
> >Does anybody got an issue while in CW keying ACOM2000 after
> >upgrade to 1.372? My ACOM immediatly fails to transmitt
> >with "ARC fault" alarm althouth I'm using it in QSK mode.
>
>Sergei, my Orion seems to key my Acom 2000A perfectly with v1.372.  Sorry 
>to hear of your troubles.
>
>73,
>Barry N1EU
>
>__________________________________________________________________
>Switch to Netscape Internet Service.
>As low as $9.95 a month -- Sign up today at 
>http://isp.netscape.com/register
>
>Netscape. Just the Net You Need.
>
>New! Netscape Toolbar for Internet Explorer
>Search from anywhere on the Web and block those annoying pop-ups.
>Download now at http://channels.netscape.com/ns/search/install.jsp
>_______________________________________________
>Orion mailing list
>Orion at contesting.com
>http://lists.contesting.com/mailman/listinfo/orion