[Orion] partial communications with radio

[BarryG]

 Eric, my WriteLog settings are "AUTO" for baud rate and CommPTT is "NO".  I didn't have to make any other settings and my INI file doesn't have settings for the COM port I'm using (COM5). For N1MM Logger, 56000 N 8 2 with "Handshake" DTR/RTS" -  note the 2 stop bits. 73,Barry N1EU--- On Sat 02/14, Eric Scace K3NA < eric at k3na.org > wrote:From: Eric Scace K3NA [mailto: eric at k3na.org]To: orion at contesting.comDate: Sat, 14 Feb 2004 17:26:08 -0500Subject: [Orion] partial communications with radioI am attempting to stuff new firmware into my new Orion. The update application on the computer complains that communication islost with the radio. The port is set for 56k, 1 stop bit, no parity, and hardware handshaking as per the programmer's manual.(This data isn't anywhere else!)Using WriteLog, I can set the frequency on the radio... but WriteLog is unable to receive data back from the radio.I tried the master reset, with no improvement.Any suggestions?-- Eric____________________
 ___________________________Orion mailing listOrion at contesting.comhttp://lists.contesting.com/mailman/listinfo/orion

_______________________________________________
No banners. No pop-ups. No kidding.
Introducing My Way - http://www.myway.com