[Orion] Raspy Receive CW Note Problem Solved

[Richard Detweiler]

Joe,

Glad you got your Orion,  I think you'll come to really love it.  It's the 
best thing going today for RX performance.

The problem you found seems to be a common problem many of us are seeing.

When this happens, if you can,  try to record all you can and send it into 
ditnbits.  It may not be all that practical, but we all try.

It may or may not be a microcode problem,  don't have an answer to that yet.

I'm seeing a couple of different symptoms,

1) the RX just gets poor,  signal is there but weak and distorted.,  No 
display changes all controlls seem to work,  I just master reset and go on.

2) The RX Stops No Signal,  static though, and TX stops,  there is the 
lettering "DSP T/O 0" next to the send 2 key on the screen.  Again, master 
reset, and back on the air.

These happen at inopportune times,  I've tried to keep the sweep off as it 
reduces the number of occurances.  Yet I've had it happen even with the 
sweep off.  It may be related to the PC polling the rig.


73's
Rich
K5SF


>From: Joe Giacobello <k2xx at swva.net>
>Reply-To: k2xx at swva.net
>To: orion at contesting.com, tentec at contesting.com
>Subject: [Orion] Raspy Receive CW Note Problwm Solved
>Date: Thu, 18 Mar 2004 00:04:06 -0500
>
>It took a master reset.  Don't understand why the problem arose in the 
>first place.  I was copying CW on 30M when all of a sudden the problem 
>appeared.  Finally decided on trying a master rest after having changed 
>power supplies without any improvement.
>
>73, Joe
>
>_______________________________________________
>Orion mailing list
>Orion at contesting.com
>http://lists.contesting.com/mailman/listinfo/orion

_________________________________________________________________
Find a broadband plan that fits. Great local deals on high-speed Internet 
access. http://click.atdmt.com/AVE/go/onm00200360ave/direct/01/