[Orion] PR-40 and Orion

[N0KHQ@aol.com]

Hey All,
 
Got my new PR-40 hooked up going directly into the Orion mic connector  
without any outboard processing.
 
TXeq is set at -18db, the SP is set at 2, TX Roll-off set at 50hz and TX BW  
set at 3150hz. Your settings may vary.
 
I set up the audio by listening through my Sony MDR-7506 head phones and  
watching the PC Spectral Analyzer (SpectraPlus and HamAlyzer).
 
Audio reports......so far, have been very good. I highly recommend the  PR-40 
for use with the Orion. The frequency response of the PR-40 is 28hz to  
18Khz. 
 
Special thanks to Bob Heil for his technical assistance. Be sure to visit  
with Bob and his crew at Dayton.  

73

John / N0KHQ / St. Louis
_http://www.hamuniverse.com/antennas.html_ 
(http://www.hamuniverse.com/antennas.html) 
http://www.cebik.com/moxon/n0khq.html