[Orion] Version 2.054 Beta Installation Question

[Richard Detweiler]

It looks like the radio is not upgrading properly,  Good thing is you 
haven't lost the current firmware.

This has happened to me once or twice,  I tracked it down to improper comm 
port settings.

Are you direct to the radio or through a USB converter?

Best wishes,
Rich
K5SF


>From: Joe Giacobello <k2xx at swva.net>
>Reply-To: k2xx at swva.net
>To: "Orion @contesting.com" <orion at contesting.com>
>CC: Carl Moreschi <n4py at earthlink.net>
>Subject: [Orion] Version 2.054 Beta Installation Question
>Date: Fri, 17 Feb 2006 15:33:38 -0500
>
>I just downloaded and installed the version 2 firmware and did a master
>reset (but not on the memories or the filter settings).  Although the
>installation program reported a successful upgrade, the radio is still
>reporting version 1.372 during the startup routine.  I again reinstalled
>the firmware "successfully" and did a master reset again and I still see
>1.372 on startup.  I verified the installation using the supplied
>program and it reported everything was OK.
>
>Is the version number reported by the radio not changing when the
>upgrade is made or is there something else going on here?  Or do I have
>to reset the memories and filters too?  I was trying to avoid that.
>
>Any input would be appreciated.
>
>73, Joe
>K2XX
>
>
>_______________________________________________
>Orion mailing list
>Orion at contesting.com
>http://lists.contesting.com/mailman/listinfo/orion